BKBZT - METALEX W SPECIAL

  • MSDS: BKBZT
  • Manufacturer: MACDERMID INC
  • Product Name: METALEX W SPECIAL
  • National Stock Number: 6850-01-156-4547
Product Identification

Product ID:METALEX W SPECIAL
MSDS Date:07/20/1988
FSC:6850
NIIN:01-156-4547
MSDS Number: BKBZT

Responsible Party
MACDERMID INC
526 HUNTINGDON AVENUE
WATERBURY, CT 06720
US

Emergency Phone: 203-575-5700/313-644-5626

Cage: 76071

Contractor
MACDERMID INC
671 WATERBURY, CT 06720 US

Telephone: 203-575-5700

Cage: 76071

Ingredients

SODIUM HYDROXIDE (SARA III)

CAS: 1310-73-2

RTECS: WB4900000

Fraction By Weight: <15%

OSHA PEL 2 MG/M3

ACGIH TLV: C 2 MG/M3; 9293

EPA Report Quantity: 1000 LBS

DOT Report Quantity: 1000 LBS


SODIUM METASILICATE

CAS: 6834-92-0

RTECS: VV9275000

Fraction By Weight: <80%

Hazards

Routes of Entry: Inhalation:YES Skin:YES Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:CORROSIVE SOLID/LIQUID WILL BURN
EYES/SKIN/RESPIRATORY TRACT. CAN CAUSE BLINDNESS. CAUSES
DESTRUCTIVE TISSUE DAMAGE AND SCARRING. MAY LEAD TO SKIN
DERMATITIS. INGESTION OF LIQUID OR MIST WILL CAUSE S EVERE BURNING
AND IRRITATION TO MUCOUS MEMBRANES, MOUTH, THROAT AND
GASTROINTESTINAL TRACT. CAN CAUSE SEVERE PNEUMONITIS
Explanation of Carcinogenicity:THE COMPONENTS OF THIS PRODUCT HAVE NOT
SHOWN ANY EVIDENCE OF BEING CARCINOGENIC.
Effects of Overexposure:OVEREXPOSURE MAY LEAD TO RESPIRATORY
IRRITATION, NAUSEA, FATIGUE, DIZZINESS, HEADACHES, UNCONSCIOUSNESS,
DERMATITIS AND EYE IRRITATION. MATERIAL IS CORROSIVE AND WILL BURN
EXPOSED TISSUE. INGESTION MA Y RESULT IN ASTHMA-LIKE REACTIONS
(WHEEZING, COUGHING AND SHORTNESS OF BREATH).
Medical Cond Aggravated by Exposure:PERSONS WITH A SKIN DISORDER, EYE
DISORDERS, OR IMPARED RESPIRATORY FUNCTION SHOULD USE CAUTION WHEN
HANDLING OR USING THIS PRODUCT.

First Aid

First Aid:SKIN: REMOVE CONTAMINATED CLOTHING. WASH WITH SOAP AND WATER.
GET MEDICAL ATTENTION IF IRRITATION PERSISTS. INHALATION: REMOVE TO
FRESH AIR & RESTORE BREATHING IF NECESSARY. GET MEDICAL ATTENTION.
EYE : IMMEDIATELY FLUSH WITH WATER FOR 15 MINUTES WHILE HOLDING
EYELIDS OPEN. GET MEDICAL ATTENTION. INGESTION: DRINK WATER/MILK TO
DILUTE. DO NOT INDUCE VOMITING. NOTHING BY MOUTH IF
UNCONSCIOUS.CALL DR.

Fire Fighting

Extinguishing Media:USE WATER FOG, CARBON DIOXIDE, FOAM, OR DRY
CHEMICAL AS APPROPRIATE FOR SURROUNDINGS.
Fire Fighting Procedures:WEAR FIRE FIGHTING PROTECTIVE EQUIPMENT AND A
FULL FACED SELF CONTAINED BREATHING APPARATUS. EVACUATE AREA. COOL
FIRE EXPOSED CONTAINERS WITH WATER SPRAY.
Unusual Fire/Explosion Hazard:COMBUSTION OR HEAT OF FIRE MAY PRODUCE
HAZARDOUS DECOMPOSITION PRODUCTS AND VAPORS.

Accidental Release

Spill Release Procedures:CONTAIN SPILL AND VACUUM RECOVER TO A SEPTIC
TANK TRUCK. DO NOT ALLOW RUNOFF TO A SEWER UNLESS MATERIAL IS
DILUTED AND NEUTRALIZED WITH DILUTE ACID SOLUTION.
Neutralizing Agent:5% ACETIC ACID (VINEGAR)

Handling

Handling and Storage Precautions:STORE IN A COOL, DRY, VENTILATED WORK
AREA. KEEP CONTAINERS CLOSED WHEN NOT IN USE. PLACE STORAGE TANKS
IN A DIKED CONTAINMENT AREA.
Other Precautions:SPILLAGE CAN BE SLIPPERY.

Exposure Controls

Respiratory Protection:NOT NORMALLY REQUIRED. USE NIOSH/MSHA APPROVED
RESPIRATOR FOR HANDLING MIST IF PROLONGED CONTACT WITH MATERIAL.
Ventilation:ADEQUATE ROOM VENTILATION SUFFICIENT TO MEET TLV.
Protective Gloves:NEOPRENE OR RUBBER GLOVES
Eye Protection:NO CONTACTS. USE CHEMICAL SAFETY GOGGLES
Other Protective Equipment:EYE WASH. CHEMICAL APRON IS RECOMMENDED.
FULL RUBBER BOOTS RECOMMENDED. DO NOT WEAR THIN RUBBER COVERS OVER
LEATHER SHOE
Work Hygienic Practices:DO NOT TAKE INTERNALLY. AVOID SKIN CONTACT.
WASH SKIN AFTER USING PRODUCT. DO NOT EAT, DRINK OR SMOKE IN WORK
AREA.
Supplemental Safety and Health
CORROSIVE LIQUID - AVOID CONTACT. CONTACT LENSES SHOULD NOT BE WORN
WHEN DEALING WITH THIS PRODUCT. KEEP EYE WASH AND QUICK DRENCH
SHOWER FACILITIES AVAILABLE WHEN WORKING WITHN THIS MATERIAL.

Chemical Properties

HCC:B1
pH:>7
Solubility in Water:APPRECIABLE
Appearance and Odor:WHITE GRANULAR POWDER

Stability

Stability Indicator/Materials to Avoid:YES
ACIDS, (DISSOLVING THE MATERIAL IN WATER CAN CREATE EXOTHERMIC
CONDITIONS)
Stability Condition to Avoid:MOISTURE,HIGH HEAT, OPEN FLAMES AND OTHER
SOURCES OF IGNITION
Hazardous Decomposition Products:LIBERATES FLAMMABLE HYDROGEN GAS ON
CONTACT WITH ACTIVE METALS SUCH AS ZN,AL,SN.

Disposal

Waste Disposal Methods:WASTE DILUTED AND NEUTRALIZED LIQUID COULD BE
FLUSHED TO A WASTE WATER TREATMENT SYSTEM VIA THE SEWER OR GIVEN TO
A LICENSED DISPOSAL CONTRACTOR. CONFORM TO ALL APPLICABLE
REGULATIONS. UNDILUTED MATER IAL IS A RCRA HAZARDOUS WASTE (CODE =
D002).

Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.